VeneTile combines the classic and elegant aesthetics of Venetian mosaics with state-of-the-art technology, making

it the ideal tile for pools, kitchens, bathrooms and any type of interior or exterior environment.

Here are its main advantages:

● Ease of installation and time saving, allowing visual control of the mosaic at all times.

● Perfect and neat finishes thanks to the homogeneity of its joints.

● Mesh-shaped composition prevents individual detachments.

● Flexibility to cover curved surfaces and steps without any inconvenience.

● Low weight. Can be transported in any trunk of standard dimensions.

● Anti-slip product, specially designed to prevent accidents.

● Athermal and impact resistant product.

● Product resistant to weathering and UV damage.

● 100% recyclable product. Polypropylene is a material that can be reused up to 6 times.

VeneTile Venetian mosaics are made of a polymer called polypropylene and different types of additives. These components are what give it unique properties and maximize the quality of the material.

For correct installation, we recommend that you refer to the User's Manual on the home page of our website.Following this procedure the product will stick without any inconvenience to the surface.

The glue/adhesive provides the necessary chemical anchoring. At the same time, VeneTile mosaics are mechanically fixed, since when the bridges are covered by the material, it acts as an anchor preventing the detachment of the mosaic.

VeneTile venetian mosaic tiles are formulated under the highest quality standards.

Our formula contains additives that provide the necessary protection against the action of ultraviolet rays

and the deterioration they may suffer from contact with chemical products such as chlorine, bleach water,

clarifying agents, etc.

As for the passage of time, it may not retain the same color intensity over the years, as happens with any

product or material in constant contact with water, chemicals and sunlight.

VeneTile siding will not scratch as long as it is properly installed. (See Installation Manual on the Home page of our web site).

They do not scratch in normal daily use.

It is possible that when in contact with abrasive materials (e.g. aluminum scouring pad)

may wear or scratch.

Our product is designed to be placed on any type of surface that is properly prepared for this purpose. (See the User's Manual on the home page of our website). It is not recommended for use on floors and high traffic areas.

VeneTile can be installed over existing coverings if they are firm and the adhesive sticks to the tile.

If necessary, the coating over which VeneTile is to be installed should be scratched or covered with a

layer of a material that serves as an adherent for the adhesive to stick to.

VeneTile Venetian mosaic tiles cannot be used to line fiberglass pools because there is

no glue that will adhere to the surface.

Lining your pool with our product will help prevent the generation of new cracks and

crevices but will not solve problems prior to installation.

Before installing VeneTile the pool must be properly repaired and waterproofed.

Is is a very simple account. In our User's Manual (Home Page) we explain step by step how to set it up.

You can also request our advice through the Contact section

of the website, by phone or via email.

It is recommended to purchase an additional 10% for future cuts, waste and/or repairs.

A box of VeneTile comes with 29 sheets of mosaic tiles. With that quantity you will

cover 3 m2. You can buy the whole box or by m2, in case you need less quantity.

● Size of each box: 34.5 cm wide x 34.5 cm deep x 13 cm high.

● Weight of each box: 4.5 kg. Approximately

Yes, it can be placed behind a stove without any problem, since the temperatures it emits are around 70°, and the mosaic tiles have a resistance of up to 180°.